Class Acts, Part 1: The Triumph 2000 and 2.5 PI Mk 1

Although the Triumph 2000 made little impression on American buyers, it was a very significant car for the British market, the first salvo in a bitter war between traditional big sedans and upscale “premium” offerings that still rages today. In this installment of Ate Up With Motor, we look at the origins of the 2000 Mk 1, its links to its Rover P6 arch-rival, and the first 2.5 PI.

1967 Triumph 2000 nose lettering © 2013 Aaron Severson

FROM VANGUARD TO ZEBU

If we discount both the cheapest and most expensive ends of the market, much of the automotive business has long been engaged in a perpetual tug of war between status and value for money. Prestige brands routinely court middle-class buyers with smaller, cheaper models while bread-and-butter automakers try to claim a chunk of the luxury market by offering greater size or more features for less cash. The reasoning is not hard to understand: Luxury and status command higher prices while increased sales volume usually translates into lower unit costs and higher profits. If you can strike the right balance between those factors, you can carve out a lucrative niche.

These were the sort of considerations on the minds of the directors of the Standard Motor Company in the mid-1950s. At that time, the company had a solid middle-class product in the form of the Vanguard, which had a storied name borrowed (with the permission of the War Ministry and the Admiralty) from a long line of distinguished Royal Navy vessels, but was otherwise a quite ordinary mid-price sedan with a big 2,088 cc (128 cu. in.) four shared with contemporary Ferguson tractors and of course the Triumph TR2/TR3 sports cars. By American standards, the Vanguard was rather small, but to Britons, it was a midsize family car, competing with rivals like the Austin A90/A95 Westminster, Vauxhall Velox/Cresta, and Ford Zephyr. The Vanguard was in no way remarkable, but it sold in respectable numbers.

1950 Standard Vanguard front 3q © 2012 Sicnag (CC BY 2.0 Generic - modified 2013 by Aaron Severson)
The early (“Phase One”) Vanguard sedan, launched in 1947, was 164 inches (4,165 mm) long and 69 inches (1,753 mm) wide on a 94-inch (2,388mm) wheelbase, weighing around 2,900 lb (1,320 kg) at the curb. Its 2,088 cc (127 cu. in.) wet-sleeve four-cylinder engine made 68 hp (51 kW), which Standard claimed was good for a top speed of 80 mph (129 km/h). (Photo: “Standard Vanguard Phase 1 Saloon” © 2012 Sicnag; resized and modified (recropped, removed background details, adjusted contrast) 2013 by Aaron Severson and used under a Creative Commons Attribution 2.0 Generic license, with this modified version offered under the same license)

The dilemma for Standard was that it was a medium-size company grappling with giants. Ford and Vauxhall were subsidiaries of two of the world’s largest automakers. Hillman, Sunbeam-Talbot, Humber, and Singer were all owned by the Rootes Group and in 1952, Austin Motors had merged with its longtime rival the Nuffield Organization to form the enormous British Motor Corporation (BMC). While Standard could to some extent fall back on its tractor business, matching its rivals’ economies of scale was a much more difficult proposition, complicated by the fact that BMC was busily snatching up suppliers like Fisher & Ludlow, which provided bodies for Standard’s smaller 8 and 10. Standard’s new managing director, Alick Dick, who had replaced the autocratic Sir John Black in early 1954, was already shopping around for merger partners, but to survive over the long term, Standard would need to rethink its product strategy.

It was perhaps for that reason that when planning began in 1957 for a Vanguard successor, codenamed Zebu, engineering director Harry Webster began exploring directions considerably more adventurous than the Vanguard, including front-wheel drive, independent rear suspension, and a rear transaxle. Some of these ideas may have been prompted at least in part by the latest developments from Citroën and Lancia, but such plans suggested that Standard was already envisioning Zebu as a more sophisticated and probably more expensive car than the Vanguard.

Curiously, Standard originally planned to retain a separate chassis rather than adopting unitized construction. (The company took the same approach with the smaller “Zobo,” which became the Triumph Herald.) Webster later insisted that maintaining body-on-frame construction was to facilitate CKD assembly for export markets, but it’s hard to believe the growing uncertainty over body suppliers didn’t have something to do with it; BMC’s Sir Leonard Lord had already rebuffed Alick Dick’s proposal to have Fisher & Ludlow produce the Zobo’s body shell.

The idea of making Zebu front-wheel drive was discarded early on (although Standard would later return to FWD for smaller cars) and the transaxle was dropped when it proved to have insuperable vibration problems, but independent rear suspension was retained, probably as much for the sake of ride comfort as handling. The engine, meanwhile, was to be a new OHV six derived from the four-cylinder in the 8/10 and Zobo, which would be smaller but considerably smoother than the agricultural 2,088 cc (127 cu. in.) four.

As with the English Ford and Vauxhall products of the time, Zebu’s styling borrowed many elements from contemporary American design. Zebu was to be a pillarless four-door hardtop with reverse-slant sail panels reminiscent of some late-50s Mercurys and Lincolns, although the sloping nose smacked more of Citroën. Based on surviving photos, it was not an unattractive design, but it would probably have dated very quickly.

1963 Ford Consul Classic four-door sedan front 3q © 2011 Charles01 (CC BY-SA 3.0 Unported)
This is not a Standard-Triumph product at all: It’s a 1963 Ford Consul Classic 109E. However, it looks considerably more like the aborted “Zebu” than the 2000 Standard-Triumph actually released. Unlike the Classic, the Zebu was envisioned as a pillarless four-door hardtop and had a different front-end treatment with single headlights in upright pods and a prominent bonnet scoop. We don’t know the Zebu’s precise dimensions, but they were probably similar to those of the Ford, which was 170.8 inches (4,337 mm) on a 99-inch (2,515mm) wheelbase. (Photo: “Ford Classic 2 door 23 Aug 1963 1498cc” © 2011 Charles01; resized 2014 by Aaron Severson and used under a Creative Commons Attribution-ShareAlike 3.0 Unported license)

A ROVER RIVAL

Back in 1954, Standard had explored the possibility of a merger with Rover, whose managing director, Spencer Wilks, was Alick Dick’s brother-in-law. (Both were also related by marriage to Sir John Black, but that familiarity had merely strengthened Wilks’ reluctance to do business with Sir John.) While nothing had come of those negotiations, both companies recognized the advantages of such an alliance and launched a new round of talks in early 1959. These discussions were no more fruitful than the first, but the merger discussions did give each company a glimpse of the other’s upcoming product plans.

It was in this way that Standard learned that Rover was developing a sophisticated 2-liter sedan, codenamed P6, which was intended to shake off the staid “Auntie” image of Rover’s existing P4 line in hopes of attracting younger buyers. This paralleled Standard’s own goals, and knowledge of the Rover program would have a strong influence on Standard’s plans.

Another pivotal moment came during a visit to Standard’s offices in Banner Lane from automotive journalist Chris Jennings, then the editor of the British magazine The Motor. Upon seeing the Zebu prototype, Jennings warned Webster and Dick that the new Ford Anglia 105E, set to debut later that year, featured similar reverse-slant sail panels. Since the Anglia was Ford of Britain’s smallest and cheapest model, such a resemblance would obviously not do the Zebu any favors, so the revelation sent Standard back to the drawing board on a design that had been close to final.

1960 Ford Anglia front 3q © 2010 Alf van Beem (PD - modified 2013 by Aaron Severson)
The car that scuttled the Zebu: Ford’s Anglia 105E, introduced at Earls Court in October 1959. The Anglia was Ford’s smallest European model, originally powered by a 997 cc (61 cu. in.) four. Visible in the right background is its eventual replacement, the Mk 1 Escort. (Photo: “Nationale oldtimerdag Zandvoort 2010, 1960 FORD 105E ANGLIA, AL-17-79 pic2” © 2010 Alf van Beem; dedicated to the public domain by the photographer under a Creative Commons CC0 1.0 Universal Public Domain Dedication, resized and modified (recropped, obscured numberplates and bystanders, blurred background) 2013 by Aaron Severson)

In September, weeks after selling its tractor business and severing its relationship with the tractor manufacturer Massey-Harris-Ferguson (which had acquired Ferguson back in 1953), Standard became part of a new holding company called Standard-Triumph International. The name reflected the board’s acknowledgment that the Standard marque was nearing the end of its usefulness: Standard’s cars were increasingly seen as dowdy and dated and in the automotive lexicon, “standard” was more commonly used as an adjective than a noun. Future development would therefore center on the Triumph brand, which Standard had owned since late 1944. Triumph had originally been a relatively upmarket brand and the name had more pizazz than Standard, undoubtedly enhanced by the popularity of the TR3 sports car.

LEYLAND, BARB, AND MICHELOTTI

As we’ve previously discussed, Standard-Triumph’s fortunes soured abruptly in 1960, the result of a sudden downward turn of the market just as the company had sunk most of its ready cash into an ambitious consolidation and expansion plan. Standard-Triumph soon found itself in a hole from which it extricated itself only through a merger late in the year with the truck manufacturer Leyland Motors.

The Zebu was already floundering as Standard struggled to find a new styling idiom and the financial crisis put the project on the shelf. In the interim, however, Zebu’s intended engine was installed in a new Vanguard Six.

1963 Standard Vanguard Six front 3q © 2011 Graham Robertson (CC BY 2.0 Generic - modified 2014 by Aaron Severson)
The Vanguard Six was similar to its Triumph 2000 successor in overall size — the Vanguard was fractionally shorter on a 4-inch (102mm) shorter wheelbase, but 2.5 inches (64 mm) wider and somewhat taller — but not in price or performance. In the Vanguard, the 1,998 cc (122 cu. in.) six made a modest 80 hp (60 kW), good for perhaps 85 mph (137 km/h). A Vanguard Six sedan cost £871 (about $2,435) with purchase tax, considerably less than the later Triumph. (Photo: “Standard Vanguard Six” © 2011 Graham Robertson; resized and modified (obscured numberplate) 2014 by Aaron Severson and used under a Creative Commons Attribution 2.0 Generic license, with this modified version offered under the same license)

Standard-Triumph revived the Zebu project in the spring of 1961, following the Leyland merger, but decided to scrap the previous designs and start over. The project received a new codename — Barb — and Standard commissioned new styling proposals from in-house design chief Les Moore and Turinese freelancer Giovanni Michelotti, who had already designed the Herald and the new TR4.

Barb’s development was on a very tight timetable. New engine or not, the Vanguard was clearly on borrowed time and Standard-Triumph wanted Barb ready by October 1963, which, as they were almost certainly aware, was when Rover planned to launch the P6. This left only a narrow window to create a clean-sheet design, but Les Moore understood the urgency and Michelotti was accustomed to working extraordinarily quickly (his design for the Zobo/Herald had been completed in less than 24 hours). Both proposals were ready by the fall of 1961. Of the two, the board preferred Michelotti’s, which Moore and Arthur Ballard, the chief body engineer, refined for production.

1,998cc six-cylinder engine in a 1964 Triumph 2000 © 2010 Martin Pettitt (CC BY 2.0 Generic - modified 2013 by Aaron Severson)
The 1,998 cc (122 cu. in.) six in a 1964 Triumph 2000. Based on Standard’s small four of the mid-fifties, the six was not an especially modern or high-revving design, with pushrod-operated overhead valves, undersquare dimensions — bore was 74.7 mm (2.94 inches) and stroke was 76.0 mm (2.99 inches) — and four main bearings rather than seven. However, the six was smooth and relatively quiet as long as you didn’t thrash it. (Photo: “Classic & Sports Cars By The Lake 12-9-2010 (Triumph, 2000, Mk1, Saloon, 1964)” © 2010 Martin Pettitt; resized and modified (recropped) 2013 by Aaron Severson and used under a Creative Commons Attribution 2.0 Generic license, with this modified version offered under the same license)

Barb was not a copy of the P6; although the two cars were similar in size (the Triumph rode a longer wheelbase, but the Rover was longer and wider overall), from a technical standpoint they were very different. However, the Rover probably served to codify Standard-Triumph’s thinking about how Barb should be positioned, including its level of interior trim and standard engine. Originally, in what appears to be a bet-hedging move, Barb’s base engine was to be the smaller 1,596 cc (97 cu. in.) six used in the Herald-based Triumph Vitesse, but fairly late in the game Standard-Triumph opted to make the 1,998 cc (122 cu. in.) six the sole engine. It was just as well; aside from the desire to achieve parity with the 1,978 cc (121 cu. in.) Rover, the 1.6-liter six was little cheaper to make than the 2-liter and had only 70 horsepower (52 kW), so it was attractive from neither a cost nor a performance standpoint.

For Barb, the 2-liter six got a new cylinder head with revised combustion chambers and a slightly higher 8.5:1 compression ratio (raised in 1964 to 9.0:1), a new intake manifold, and a pair of Triumph-designed Zenith Stromberg 150 CD side-draft carburetors, all of which brought output to 90 net horsepower (67 kW) and 117 lb-ft (159 N-m) of torque. The engine was tipped 10 degrees to the right to clear the sloping hood and linked to a four-speed all-synchro gearbox, basically the TR4 transmission with slightly shorter indirect ratios. Laycock de Normanville overdrive would be optional, as would a three-speed automatic.

1963 Triumph Vitesse saloon front 3q © 2011 Charles01 (CC BY-SA 3.0 Unported)
In 1,596 cc form, the Triumph straight six was smoother than contemporary fours of similar displacement, but no more powerful, making just 70 net horsepower (52 kW) (albeit with a more encouraging 110 lb-ft (149 N-m) of torque). Even the compact Vitesse — essentially a six-cylinder Herald — needed more than 15 seconds to reach 60 mph (97 km/h) and had a top speed of perhaps 90 mph (145 km/h), so the same engine in the 500 lb (227 kg) heavier Barb would undoubtedly have produced anemic performance. (Photo: “Triumph Vitesse 1600 July1963 1596cc” © 2011 Charles01; resized 2013/2014 by Aaron Severson and used under a Creative Commons Attribution-ShareAlike 3.0 Unported license)

In technical specification, the biggest change from Zebu to Barb was the adoption of monocoque construction, with body shells produced by Pressed Steel Ltd. at its plant in Swindon. All-independent suspension was retained, with MacPherson struts in front and semi-trailing arms on coil springs in back, both mounted on rubber-isolated subframes. No anti-roll bars were fitted and spring rates were relatively low, although damping was fairly firm to maintain body control. Steering was rack and pinion and disc brakes were fitted at the front.

By the time Barb began pilot production, the last Standard passenger cars were gone — the final production car, a four-cylinder Ensign, had come off the line earlier that year — and with them most of the familiar model names. The new model would be called simply Triumph 2000, a designation last used in 1949 for the Vanguard-engined versions of the postwar 1800 roadster and saloon.

1963 Standard Ensign estate front 3q © 2011 Charles01 (CC BY-SA 3.0 Unported)
Although the Vanguard got a six-cylinder engine in late 1960, the Ensign, introduced in 1957, retained the wet-sleeve four. Late cars had the same 2,138 cc (130 cu. in.) displacement as the Triumph TR4, albeit in a much milder state of tune. (Photo: “Standard Ensign estate February 1963 2138cc” © 2011 Charles01; resized 2013/2014 by Aaron Severson and used under a Creative Commons Attribution-ShareAlike 3.0 Unported license)

11 Comments

Add a Comment
  1. That rev limiter on the injected engine can be negated without much trouble and without that a Rover V8 can be easily outrun

  2. Wow, I can detect traces of each and every one of the many styling themes one got on an American Ford of the era crammed onto that tiny little car. There’s the proto Galaxie (the show car Galaxie, that is) roof. The surprised double headlights. The horizontal fin. The stars in the grill. Hysterical.

    1. What works on 18 feet land yachts never quite translates to smaller platforms- eg the Vauxhall Victor.

      Another fine, enlightening article too. Thank you for your efforts.

    2. The Zebu wasn’t quite that OTT, but it had its own oddities, like a split scoop at the leading edge of the bonnet. Take a mid-50s Mercury, add a sloping hood between the headlight pods, graft on the roofline from a ’63 or ’64 Breezeway four-door hardtop, reduce it to about three-fifths scale and you get a rough approximation. I think if Standard-Triumph had produced it that way, by 1964 it would have looked painfully old-fashioned, especially next to the Rover 2000.

  3. Thanks for yet another fascinating article.
    I know this is nitpicking, but “occasional tendency of the sliding driveshaft splines to bind under power” Don’t you mean halfshafts? TR4A, 5, 250 & 6 had a reputation for halfshafts binding under hard cornering and considering that the 2000 uses a similar IRS setup, would probably exhibit like behavior. It seems to me there’s a good reason other makers used rotoflex or CV joints back there instead of U-joints & splines. Also, since the diff is mounted to the body / chassis structure in an IRS, the driveshaft splines shouldn’t see much movement anyway.

    1. Oops, that should have been halfshafts; I fixed it in the text. Yes, the IRS TRs and 2000 had basically the same rear suspension (the big difference being that the TRs had lever-action shocks in back because there wasn’t room for tubular shock absorbers) and the same issue with the driveshaft splines and their tendency to bind, which on the sedans tended to happen if you jumped on and off the throttle suddenly (e.g., to make a quick shift).

      The reason the sliding splines were used was that the rear suspension geometry would allow the track width to change as the wheels went from full jounce to full rebound; the splines accommodated those track changes. I assume STI decided CV joints were too expensive. Interestingly, when Ford went to semi-trailing arm independent suspension on the Mk IV Zephyr in 1966, they were determined not to use splines and so concocted an odd little arrangement wherein the inner bearing closest to the differential would actually move on a little swing shackle instead.

  4. We are dealing with vocabulary differences here. in the UK, what they call the propeller shaft, or ‘propshaft’ is what we Americans call the driveshaft. What we Americans call a halfshaft is what the Brits call a driveshaft.

  5. The availability (or not)of the various driveshaft / halfshaft techniques and their manufacturing technologies has been a strong influence on car design, a study of it’s own even.
    I expect Triumph would have used C.V. joints if they had been available in the right size at the right price. From about the same date, the first Porsche 911s used what now seems an odd arrangement of Hooke joint + double Hooke joint as another solution to the same problem. Then there were Rotoflex and other fabric/rubber joints. None of these techniques are in common car use today.

  6. Good, interesting article.

    One little point; the engine was tilted at 7 degrees to avoid the dynamo touching the battery.

  7. Surely Triumph could have uprated the 1.6 6-cylinder engine to increase its power and make it more suitable for a low level version of the Triumph 2000 (plus further use in the Triumph GT6, etc)?

    At minimum it should be possible to extract around 83 hp from the 1.6 6-cylinder (similar to Rover’s initial 80 hp 1.8 version of the 2-litre P6 Overhead Cam engine), while the TS and PI routes should equate to around 92+ hp and 96+ hp respectively, even if such an engine would likely be more suited to an earlier RWD Triumph 1300 (were it feasible of course).

    1. One would think! After all, the warmer “Mexico” version of Ford’s 1.6-liter Kent crossflow was good for 86 PS DIN, as was Toyota’s 2T-B four (the former with a single Weber two-throat, the latter with two Aisan dual-throat carburetors). The small six’s porting and combustion chamber design really sacrificed a lot for smoothness. Triumph found that even with the 1,998cc six, getting more power at the high end compromised low-end torque by a like degree and made the engine dreadfully thirsty to boot. (The PI approach did as well, since its original cam profile was really pretty radical for a street engine, but the 2500’s much longer stroke sort of balanced the ledger in terms of torque.) Since the 2000 was significantly heavier than the Vitesse, that would have been a significant problem and was the main reason there wasn’t a 1600 sedan.

      I know Triumph wrestled with the limited output of the small six and concluded there was no quick fix. I’m assuming “completely redesign the cylinder head” wasn’t in the cards for financial or organizational reasons, which is what I suspect it would have taken.

Leave a Reply

Your email address will not be published. Required fields are marked *

Comments may be moderated. Submitting a comment signifies your acceptance of our Comment Policy — please read it first! You must be at least 18 to comment. PLEASE DON'T SUBMIT COPYRIGHTED CONTENT YOU AREN'T AUTHORIZED TO USE!