Bucking the System: The 1963-1967 Corvette Sting Ray (C2)

For more than 50 years, the Chevrolet Corvette has represented a curious paradox for General Motors. The product of GM’s humblest division, it has frequently been among the corporation’s most expensive cars. Designed and engineered largely outside of the normal GM system, it has often been hamstrung by corporate politics. Despite that, it remains the car that the company’s stylists most want to design, its engineers most want to develop, and its workers take the most pride in building. It is a vision of GM as it could be. This week, we look at the model that would set the standard for all future Corvette generations: the Corvette C2, the justly legendary 1963-1967 Chevrolet Corvette Sting Ray.
1967 Chevrolet Corvette convertible badge

Q-SHIPS

General Motors in the 1950s and early 1960s routinely dazzled America with its spectacular traveling auto shows and futuristic concept cars. Its well-funded research department explored everything from front-wheel drive to gas turbine engines. Visiting the Motorama, one could almost imagine that flying cars wearing Chevy badges were only a few years away.

Chevrolet’s production engineering seemed to be on the move, as well. Under the leadership of chief engineer (and later general manager) Ed Cole, the division got a modern, overhead-valve V8 engine in 1955, and well-heeled buyers could add the latest luxury features, including power steering, power windows, and air conditioning. By 1957, the options list had grown to include fuel injection and the sophisticated (if unreliable) triple-turbine Turboglide automatic transmission.

Although Chevrolet’s chassis engineering — body-on-frame construction and Hotchkiss drive — could have come from a prewar car, even that seemed about to change. In 1957, the corporate Engineering Staff began work on a radical new program known as project “Q,” originally slated for the 1960 model year. Project Q promised a rear-mounted transaxle (for better weight distribution), independent rear suspension, and (according to some accounts) four-wheel disc brakes, which would have made GM’s the most sophisticated sedans in the world. It would also provide the perfect opportunity to make a cutting-edge sports car out of the Corvette.

THE CHEVROLET CORVETTE

Although it was undeniably pretty, the original Corvette, introduced in 1953, was in many ways a glorified show car. It had been designed in great haste, using a lot of off-the-shelf pieces, and it was neither very practical nor particularly sporting. Despite its fiberglass body, it was heavy for a sports car and its performance was compromised by a poorly sorted suspension and compulsory automatic transmission. It had no exterior door handles or locks, clumsy side curtains instead of windows, hard-to-read instruments, and mediocre fit and finish. It was little wonder that in 1954, the Corvette’s first full year of production, Chevrolet managed to find homes for only 2,780 of the 3,640 cars built.

1954 Chevrolet Corvette front 3q © 2009 Latvian98 (used with permission)
The original Chevrolet Corvette was powered by a souped-up version of Chevrolet’s trusty “Blue Flame” six, making 150 (later 155) gross horsepower (112 and 116 kW). Mated only to a two-speed Powerglide automatic, it offered brisk but not sizzling performance: 0-60mph (0-97 km/h) in about 11 seconds, a top speed of a bit under 110 mph (177 km/h). Note the absence of door handles — the 1953-55 Corvettes had neither door handles nor roll-up windows. (Photo: “NCRS Winter Meet 2009 (1954 Chevrolet Corvette)” © 2009 Allen/Latvian98; used with permission)

Despite that mediocre showing, which nearly sent the roadster to an early grave, the Corvette had already acquired a small but loyal following within GM. Its fans included formidable Styling boss Harley Earl (who had originally conceived it); Earl’s lieutenant, Bill Mitchell; and a fiery Russian-born engineer named Zora Arkus-Duntov.

It was Duntov who had saved the Corvette from cancellation with an impassioned memorandum to Chevrolet chief engineer Ed Cole and Research and Development chief Maurice Olley. Duntov’s memo, written in December 1953, argued forcefully that canceling the Corvette would hurt Chevrolet’s reputation, particularly with young, performance-minded customers. He proposed instead that Chevy build a real performance image for the Corvette, which would earn the loyalty of enthusiasts and add luster to the rest of the line.

In 1955, the Corvette got Chevrolet’s new 265 cu. in. (4,344 cc) V8 engine and a manual transmission. The following year, it was revamped with proper door handles and locks, roll-up windows and even-more-powerful engines, with up to 240 horsepower (179 kW). After three years of Chevrolet insisting it was not a sports car, the Corvette made its first forays into real competition, earning the grudging respect of sports car purists.

1961 Chevrolet Mako Shark front 3q © 2008 Jim Greenfield (used with permission)
Bill Mitchell developed this show car (code-named XP-755 and later named “Shark” after Mitchell caught a shark during a fishing trip) in early 1961, foreshadowing the styling of the 1963 Corvette. Mitchell used the Shark as his personal car for a time; Chevrolet general manager Semon “Bunkie” Knudsen also ordered a copy for his own use. In 1965, it was renamed “Mako Shark I” when Chevrolet unveiled the Mako Shark II show car, which foreshadowed the 1968 Chevrolet Corvette C3. (Photo: “1961 Corvette Mako Shark” © 2008 Jim Greenfield (Jim G Photography); used with permission)

Duntov did his best with the Corvette’s humble underpinnings, but its chassis and brakes, derived from rustic passenger-car hardware, were not well suited to sports-car duty. A competition handling package helped, but Duntov still had dreams of better weight distribution, an independent suspension, and disc brakes — in short, exactly what a “Q-Corvette” would offer.

BILL MITCHELL TAKES A HAND

Like his mentor, Harley Earl, GM styling director Mitchell loved sports cars. When Earl had Chevy engineers build a Corvette-based racer, the SR-2, for his son, Jerry, Mitchell ordered a second built for his own use. During his tenure as head of GM design from 1958 to 1977, he would commission a whole series of custom-built, high-powered sports cars for his own use.

Many of Mitchell’s staff were of a similar bent. In 1956, stylists Robert Cumberford and Tony Lapine (who would later design the Porsche 928) were playing with ideas for an advanced Corvette for 1958, featuring an aluminum body, a rear transaxle, and a retractable hardtop. It was rejected on cost grounds, but it made clear that GM designers were clearly as eager as Duntov to take the Corvette in a more sophisticated direction.

Naturally, the prospect of the Q-Corvette was very exciting. Mitchell made it more so when he returned to Detroit from the Turin Auto Show. He called for an informal design contest to develop the styling cues for the Q-Corvette. The winner was a young designer named Pete Brock, whose sketches Mitchell chose in October 1957. Mitchell told him it was the right direction, and instructed him to proceed. Stylist Bob McLean subsequently fashioned it into a sleek, low-slung coupe, which was built as a full-size clay model.

THE FIRST STING RAY

Unfortunately for Mitchell, Duntov, and the designers, the economic downturn of 1957 and 1958 put a damper on the Q projects. The 1958 model year was awful for Detroit, with sales of most cars down 30% or more — not a good time for a radical new design. GM management first froze and then canceled the Q-sedan project. Zora Arkus-Duntov, knowing which way the wind was blowing, admitted frankly to Chevy chief engineer Harry Barr that the Q-Corvette would be too expensive to justify on its own. It too was canceled.

Also affecting the Corvette’s fortunes was the AMA racing ban. In June 1957, the Automobile Manufacturers Association resolved that its members (which included all the major U.S. automakers) would not participate in, support, or promote racing, or advertise automotive performance in any way. Some division managers honored the ban more in the breach than in the observance, but GM senior management took it very seriously.

1965 Chevrolet Corvette C2 coupe front 3q © 2015 Jeremy (CC BY 2.0 Generic)
The 1963–1967 Corvette Sting Ray was actually slightly smaller than its 1958–1962 predecessors: 175.3 inches (4,453 mm) long on a 98-inch (2,489mm) wheelbase. The Sting Ray’s pop-up headlamps hearken back to the 1957 Q-Corvette study; they were not well liked by critics, but they became a Corvette trademark that lasted until the C6 model of 2005-on. Alloy wheels were an expensive option ($322.80), prized today. This car, incidentally, is a RHD conversion, seen at a show in New South Wales, Australia. (Photo: “1965 Chevrolet Corvette C2 Sting Ray” © 2015 Jeremy; used under a Creative Commons Attribution 2.0 Generic license)

When the Q-Corvette was canceled, Mitchell decided he would develop it himself for a race car of his own. In December 1958, he bought the chassis of the Corvette SS — a development mule for the now-defunct Corvette competition program — from GM for a token payment of $1. He then got stylist Chuck Pohlman to convert Pete Brock’s Q-Corvette proposal into a roadster and enlisted stylists Tony Lapine, Gene Garfinkle, and Larry Shinoda to build it in a separate studio nicknamed the “Hammer Room.” Although the designers gave Mitchell’s car a GM project code — XP-96 — Pete Brock later recalled that it was built in secret, to avoid trouble with senior management for flaunting the AMA ban.

The XP-96, which Mitchell dubbed Sting Ray, was finished by early 1959. It made its racing debut in the Sports Car Club of America (SCCA) President’s Cup race in April, driven by dentist Dick Thompson. The Sting Ray eventually won its class (C-Modified) for both 1959 and 1960, although Mitchell privately admitted it cost him a fortune.

DUNTOV RIPOSTES

Zora Arkus-Duntov was not very happy about Mitchell’s Sting Ray. Although he wanted to see a proper Corvette racer as much as anyone, Duntov was fighting a delicate political battle. He still had great technical ambitions: independent suspension, disc brakes, even a mid-engine layout. Mitchell’s flaunting of the rules put those ambitions at risk. Even though the Sting Ray was nominally a private venture, it didn’t look like one. It could easily have become an excuse for GM’s conservative senior management to kill the Corvette entirely or transform it into a bloated boulevardier like the Ford Thunderbird.

Duntov, however, developed his own management-baiting exercise: the CERV — Chevrolet Experimental Racing Vehicle (later changed to the more politic Chevrolet Experimental Research Vehicle). Looking uncannily like an Indy 500 racer, the CERV had its engine behind the driver, with a rear transaxle and an independent rear suspension similar to that of the aborted Q-Corvette. It had finned aluminum drum brakes, mounted inboard to reduce unsprung weight. Powered by an all-aluminum version of Chevy’s familiar V8, its research efforts included the Pikes Peak Hill Climb and 180-mph (290-km/h) laps around the Daytona speedway. The CERV was not intended for production, but its engineering would heavily influence the next-generation Corvette.

1967 Chevrolet Corvette convertible front
From 1962 until the spring of 1965, all Chevrolet Corvettes had a 327 cu. in. (5,354 cc) “Turbo-Fire” V8, available in several states of tune. The Corvette Sting Ray’s standard engine had 250 horsepower (186 kW); the top option was the L84 “fuelie,” with Rochester mechanical fuel injection and 360 or 375 horsepower (249 or 280 kW). In 1966, the formerly optional 300 horsepower (224 kW) L75 engine became standard equipment — this 1967 model has that engine.

STING RAY TO XP-720

Although the original Corvette’s basic body and chassis would soldier on until 1962, Chevrolet knew it couldn’t go on forever, and GM management approved the development of an all-new Corvette for the 1963 model year.

After the Sting Ray racer was complete, Bill Mitchell assigned Larry Shinoda to develop its styling themes for the next Corvette, then code-named XP-720. The first clay mock-up was shown to GM management in October 1959. Their response was encouraging, so Mitchell ordered Shinoda to build a full-size clay model, which was approved in April 1960. Mitchell and Shinoda conceived the XP-720 only as a coupe — hearkening back to Pete Brock’s original Q-Corvette designs — but Chevrolet management requested a convertible, as well. The final production designs for both closed and open versions were approved in December 1960.

1963 Chevrolet Corvette backlight © 2009 Latvian98 (used with permission)
One of the major points of contention between Duntov and Mitchell was the divided rear window of the 1963 Corvette Sting Ray coupe. Mitchell saw it as an essential design feature — the tail of the stingray. (It may also have been inspired by the 1937 Bugatti T57 Atlantic.) Duntov and most critics considered it a hazard to visibility, and so it was dropped after only one model year. (Photo: Southwest Florida Seafood Festival and Car Show 2009 (1963 Chevrolet Corvette Sting Ray Split Window) © 2009 Allen/Latvian98; used with permission)

THE IRS DILEMMA

After the XP-720 was approved for production, Duntov and his Corvette engineering staff set to work developing the mechanical package. Duntov was in an awkward position, trapped between management’s reluctance to invest in small-volume cars on one side and Bill Mitchell’s flights of fancy on the other. Mitchell ultimately had far more power than Duntov in the corporation, and the two didn’t often get along.

Still, this was Duntov’s chance. The 1963 model would be the first-ever all-new Corvette. It was the perfect opportunity to make some major technical improvements. Although Duntov wasn’t happy about the new body’s aerodynamics (it had lower drag, but a great deal of high-speed lift), the XP-720 design offered a number of advantages. It would have a shorter wheelbase than before — which would give better maneuverability — and its close-coupled proportions allowed the cabin to be moved toward the rear, for better weight distribution. Duntov’s people also developed a new ladder-type frame, which was no heavier than the old one, but significantly stiffer and stronger.

1965 Chevrolet Corvette C2 coupe rear 3q © 2015 Jeremy (CC BY 2.0 Generic)
The rear styling of the Corvette Sting Ray was later borrowed by Jerry Hirshberg for the 1971 Buick Riviera. The Riviera had a decklid, however, which the Sting Ray does not — the trunk can only be loaded from inside the car because there wasn’t enough development money to create the lift-up hatch that would have been necessary for exterior access. (Photo: “1965 Chevrolet Corvette C2 Sting Ray” © 2015 Jeremy; used under a Creative Commons Attribution 2.0 Generic license)

Duntov’s great hope was for an independent rear suspension. This was a major departure for American automakers in those days; GM had used swing axles for the Corvair and Pontiac Tempest with uninspiring results, but the rest of its cars relied on live axles. The earlier Corvette’s live axle, however, had been its Achilles heel. It was very heavy and because the Corvette was much lighter than an Impala, its ratio of sprung weight to unsprung weight was poor. The result was a choppier ride and unsettled high-speed handling. The biggest advantage of independent rear suspension would be mounting the heavy differential on the frame, where it would not be part of the unsprung weight. IRS would also allow camber gain — keeping the wheels upright as the body leaned — for better cornering.

The downside, as always, was cost. A live axle was simple, which made it cheap. IRS required more parts, more involved assembly, and more development. It was that much worse because the Corvette’s suspension would be unique; there would be fewer units over which to spread the development expense. It was also questionable whether the average buyer would notice it was there. Any number of sports and GT cars of the era still used live axles (Ferrari, Aston Martin, and Alfa Romeo, to name three), so having one did not automatically mark the Corvette as backwards.

Duntov insisted that independent rear suspension would increase the Corvette’s appeal, even to non-sporting drivers, by allowing a far more liveable ride along with better handling. He boldly promised that IRS would enable Chevrolet to sell 30,000 Corvettes a year, more than twice its record-setting 1962 sales. Furthermore, he noted, most of the development work had already been done for the Q-Corvette and CERV. He already had a relatively cost-effective three-link design. As in 1953, Duntov knew which buttons to push, and his proposal was approved.

1967 Chevrolet Corvette convertible rear
The 1963-1967 Corvette Sting Ray’s rear suspension was a three-link design. Each rear-wheel hub carrier is carried on a trailing arm, which transmits drive torque to the body. The halfshaft, which has a universal joint on either end, acts as an upper control arm, while a single transverse link acts as the lower arm. The actual suspension is a transverse leaf spring, supplemented on big-block models by a rear anti-roll bar.

THE 1963 CHEVROLET CORVETTE STING RAY

The new car, proudly badged as the Chevrolet Corvette Sting Ray, made its press debut in October 1962 and went on sale a few weeks later as a 1963 model. Predictably, it was a sensation. Even though its engines were carried over from the previous year, the Sting Ray had the most sophisticated engineering of any American car of its day, barring Chevrolet’s own Corvair (which adopted a very similar rear suspension two years later).

Straight-line performance remained fierce. Even with one of the milder engines and Powerglide, 0-60 mph (0-97 km/h) took less than eight seconds, with top speeds of around 130 mph (209 km/h). Ride and handling were also greatly improved. Some European critics wanted better steering feel, but the press reaction was very favorable.

1967 Chevrolet Corvette convertible Powerglide shifter
Corvette Sting Ray customers were unique among American buyers in preferring manual transmission — less than 15% of Sting Rays were ordered with automatic. If Chevrolet had offered the newer three-speed Turbo Hydra-Matic in place of the elderly two-speed Powerglide, it might have been a different story, but the newer automatic would not appear in the Corvette until the 1968 Corvette C3.

The Corvette Sting Ray’s styling was equally spectacular, although some observers, particularly British ones, disliked its assortment of nonfunctional scoops and louvers. Almost all reviewers were critical of the split rear window. Several journalists noted that the rear-window divider was wide enough to hide a policeman behind you — hardly a desirable feature for a car of the Sting Ray’s performance potential. (It would be gone the following year.)

Customers were as impressed as most critics. The Corvette Sting Ray didn’t meet Duntov’s ambitious projections, but its 1963 sales were up nearly 50% from 1962, which itself had been a record year for the Corvette. 1964 sales were even better: 22,229.

1967 Chevrolet Corvette convertible dashboard
One of the 1963-1967 Corvette Sting Ray’s biggest improvements over earlier Corvettes was its dash, which had a full set of gauges (including a tachometer) directly in front of the driver. The instruments on earlier cars were haphazardly placed, and hard to read. Unfortunately, the glass instrument covers caused a great deal of reflection, which could be very annoying.

STOPPING POWER AND CUBIC INCHES

Duntov had wanted better brakes for the Corvette Sting Ray from the beginning, but it had been hard enough to get money for the independent suspension. In 1965, the Corvette’s mediocre drum brakes were finally replaced with a set of big Delco-Moraine vented discs — far and away the best brakes available on any contemporary American car. The Corvette finally had stopping power commensurate with its acceleration.

The Corvette hadn’t lacked for horsepower since the introduction of the V8 in 1955, but even its most powerful engine was outmatched by Carroll Shelby’s new Cobra sports cars. In response, Duntov reluctantly introduced an optional big-block V8. Initially displacing 396 cu. in. (6,488 cc), it was quickly bored out to 427 cu. in. (6,996 cc), offering a staggering 425 gross horsepower (317 kW).

The big engine added 150 pounds (68 kg) to the front end, which was not beneficial to handling, but it made for scorching straight-line performance. In March 1966, Motor Trend‘s Bob McVay reached 0-60 mph in 5.6 seconds with a 427 Corvette convertible, although he noted that it could be hairy, particularly in the rain; he concluded that most customers would be better off with one of the smaller engines. Even hotter big-blocks were available for 1967, but they were primarily intended for racetrack-bound customers, and sold in tiny numbers.

1966 Chevrolet Corvette 427 hood callouts
Officially, the 1966 Corvette Sting Ray’s optional 427 cu. in. (6,996 cc) engine was no more powerful than the 396 cu. in. (6,488 cc) engine it replaced, but reviewers were skeptical, suspecting that the actual output was considerably higher. As a case in point, Motor Trend‘s 1966 test car recorded quarter-mile acceleration of 13.4 seconds with a trap speed of 105 mph (169 km/h), enough to let the big-engine Sting Ray show its doors to almost any of Detroit’s contemporary muscle cars.

Critics whose eyes were not clouded with red mist still preferred the milder engines. The heavy big block taxed the Corvette’s modest tires and pointed out the structural limitations of its fiberglass construction. Reviewers not wowed by the shape and copious horsepower complained of a lack of structural integrity that resulted in squeaks, rattles, and disconcerting thumping motions, particularly with the convertible. Nevertheless, big-engine Corvettes were among the very quickest cars in the world, which was enough for many buyers.

LAST HURRAH

The Corvette Sting Ray was originally slated for replacement in 1967, but delays with its successor earned it an unscheduled encore. The 1967 Corvette still sold well and many buyers found its styling — now free of some of the minor gimmicks that cluttered the early models — the most tasteful of the lot.

Sales of the 1963-1967 Corvette Sting Ray never quite reached 30,000 a year, but by the time production ended in July 1967, combined C2 Corvette production had reached 117,964. That was far better than Chevrolet had expected and a vast improvement over the mediocre numbers of the mid-1950s. The Corvette Sting Ray also earned Chevrolet a great deal of favorable publicity both in the U.S. and abroad. It had its limitations, to be sure, but so did its principal rivals, most of which were a lot more expensive.

1967 Chevrolet Corvette convertible rear 3q
Although the Corvette Sting Ray coupe got the most attention, buyers of 1963-1967 Corvettes preferred the convertible. Sales of the two models were nearly even for 1963, but the convertible subsequently outsold the coupe by a large margin. Part of the reason was price: the coupe was more than $200 more expensive.

Duntov, Mitchell, and Larry Shinoda spent much of the Corvette Sting Ray’s lifespan immersed in the contentious development of its successor, which finally bowed for 1968. Duntov still had grand ambitions for a smaller, lighter, mid-engine Corvette, but it was not to be. The C3 Corvette ended up as a mechanical carryover of the C2, with a new body that took the Sting Ray’s styling themes to the edge of Camp. It proved to be a long-lived design, lasting until 1982. Its successors, the 1984 C4, the 1997 C5, and the 2005 C6, had more advanced technology (ultimately including a transaxle like that originally planned for the Q-Corvette), but hewed closely to the 1963-1967 Corvette Sting Ray’s look and concept.

The sad thing was not that the Sting Ray’s successors followed in its footsteps, but that no other GM cars did. Its disc brakes and three-link suspension, though not cutting edge by today’s standards, could have done wonders for GM’s ordinary sedans, reviving some of the concepts from the old Q-sedan project to good effect. Naturally, that never happened, largely on cost grounds. The irony was that for all GM’s concern about cost effectiveness, Chevrolet’s engineering department was significantly over budget throughout the sixties. For all the money GM spent, the technology of its cars seemed to be standing still.

The only reason the Corvette Sting Ray ended up as sophisticated as it did was the stubborn determination of its designers, and their willingness to bend or break the corporation’s rules to get what they wanted. Remarkably, Duntov and Mitchell’s successors have largely kept that faith, carving out a surprising level of independence for the Corvette within the Chevrolet organization. Whatever you feel about the Corvette — and we must admit it’s not exactly our cup of tea — you must admire the fact that its designers and engineers have never lost sight of what it’s supposed to be, even in the face of daunting opposition from both inside and outside the company.

A few months ago, Robert Farago, [then] editor of The Truth About Cars, published an editorial suggesting that GM kill the Corvette as a sign of its renewed commitment to building good bread-and-butter cars, rather than a few expensive halo models like the ‘Vette or the Cadillac CTS-V. We understand his reasoning, but we would rather see the kind of passion and commitment evident in the Corvette extended to GM’s other products. If they could do that, then General Motors might actually stand a chance.

FIN

NOTES ON SOURCES

Our sources for this article included John Barach, “Corvette History,” Motor Era, June 2002, www.motorera. com/ corvette/index.htm, accessed 8 May 2009; Roger Huntington, “Bred to Race,” Motor Trend January 1963, pp. 40-43, 94; Randy Leffingwell, Corvette: America’s Sports Car (Osceola, WI: Motorbooks International, 1997); Karl Ludvigsen, “The Corvettes in Chevy’s closet are the most interesting of all!” Motor Trend Vol. 22, No. 1 (January 1970), pp. 32-37, 96; Mike Mueller, Classic Corvette: The First Thirty Years (Osceola, WI: MBI Publishing Company, 2002); Spencer Murray, “The Sting Ray Emerges” and “The Between Years: ’64 to ’67,” Corvette: An American Classic (Los Angeles, CA: Peterson Publishing Company, 1978), reprinted in Corvette Stingray Gold Portfolio 1963-1967, ed. R.M. Clarke (Cobham, England: Brooklands Books Ltd., ca. 1990), pp. 130-159; Ken Polsson, “Chronology of Chevrolet Corvettes,” www.islandnet. com/~kpolsson/vettehis/, accessed 9 May 2009; and Mark Theobald, “Pete Brock,” Coachbuilt, 2004, www.coachbuilt. com, accessed 8 May 2009.

Period road tests consulted for this article included “Car and Driver Road Research Report: Corvette Sting Ray,” Car and Driver April 1963, Jim Wright, “Corvette Engineering for 1965,” Motor Trend October 1964; “Jaguar XKE – Most Overrated? Corvette Sting Ray – Just a Plastic Chevy?” Road Test May 1965; Bob McVay, “Corvette 427 Road Test: It’s Got the Go-Now…You Need the Know-How!” Motor Trend March 1966; and “Corvettes: What’ll You Have? 427 cu. in. and 4-Speed, or 327 cu. in. and Automatic,” Car Life August 1966, all of which are reprinted in Corvette Stingray Gold Portfolio 1963-1967; and “1965 Corvette Sting Ray,” Road & Track December 1964, pp. 22–25; and Bob McVay, “Corvette Sting Ray Road Test,” Motor Trend September 1964, pp. 34–39.


10 Comments

Add a Comment
  1. The 1957 Oldsmobiles ( and some other GM vehicles, I think, ) have that three piece rear window which may have inspired the the split window of the ’63 Corvette. I’ve heard that many people were complaining about the the ’57 Old’s rear window because of the lack of vision.

    Anyway, thanks for the article. The 1963 Corvette is probably the best looking American sports car ever. ( Not beautiful, just handsome and aggressive. )

    1. You're talking about this, right? http://www.flickr.com/photos/argentla/2568722126/

      I see what you're saying, but I don't think there was any specific connection between that and the Corvette. Given Bill Mitchell's love of 1930s sports cars, I think the Bugatti Atlantic is a far more direct inspiration for the rear spine, just as the Auburn Speedster was a likely inspiration for the shape of the tail.

      Part of the visibility problem, I believe, is that Mitchell and Shinoda probably wanted the spine to be narrower (like the Atlantic), but for structural reasons, it ended up having to be wider than intended, probably to avoid body flex around the rear windows. Earlier cars had divided rear windows with narrow divider bars, but they had steel (or wood-steel composite) bodies, not GRP.

  2. Comparing the assorted Vette development efforts to the rest of GM’s R&D efforts really left me wondering what [i]were [/i]they doing for R&D?

    After about ’64 or ’65, you had a well-established set of chassis’, no suspension developments, 3 basic engine configurations (I6, SB, BB) and a handful of completed transmissions.

    What could they have possibly been working on?

    1. [quote]What could they have possibly been working on?[/quote]
      Well, there were some projects that were originally slated for production, but didn’t make it, like the Q-sedan or the later Wankel rotary engine. And by the late 1960s, GM was expending a lot of development resources on emissions and safety compliance.

      I’ve always wondered — and please note that this is simply my speculation, not based on any specific evidence — if the ultimate purpose of some of GM’s corporate research and development work was to validate the corporation’s decisions [i]not[/i] to do certain things. The idea of spending a lot of money on a research program to justify not implementing a particular technology because it’s too expensive sounds counterintuitive, but it would be typical of a company like GM. At the same time, R&D expenses are generally tax deductible, so it would have been a way for the corporation to reduce its considerable tax liability.

      1. Makes sense.

        In a similar vein, it seems GM was bad at directing R&D efforts towards realistically attainable innovation targets.

        It was either pie-in-the-sky rotary/hydrogen/all-aluminum projects or optimizing bumper brackets. That, when they could’ve/should’ve been working on incremental suspension/brakes/chassis upgrades.

        1. Well, in GM-land, each division was responsible for their own incremental stuff. R&D was theoretically responsible only for big projects that were either outside the purview of the individual divisions, or pie-in-the-sky. (Even big projects tended to be ‘owned’ by individual divisions if they were intended for production, because the support of a division general manager was often necessary for them to get things done. That’s how Hydra-Matic happened, and it was also how Olds ended up with the FWD Toronado.)

          There’s a lot of complicated jockeying also between budget, authority, and credit. Depending on the project, an individual division might be happy to have it under R&D (to avoid having the cost added to their balance sheet), or be annoyed because it deprived them of control of something their leadership was interested in.

          The tragedy of GM is that they’ve always had plenty of engineers and managers who would love to innovate, but the culture and structure just work against it at every turn.

  3. I had a friend who bought a ’67 Corvette in 1969. Paid $3900. for it.
    It had a 427/450 hp engine and wide ratio 4spd. The engine had been balanced, blueprinted and had headers. It was geared on the high side and I drove it more than a few times. It would go to 140 mph in third and the you shifted into fourth. When doing a full throttle takeoff you barely had enough time to fully let out the clutch before it was time to shift into second. This was because of the wide ratio 4spd and the tall rear end. It was especially interesting when alcohol fueled parties turned into drag races. I have driven a lot of fast cars but never have owned one. But all of them were a kick to drive. I have the memories of been fortunate enough to drive them.

  4. My favourite 1963 Corvette is the Pininfarina-built Corvette Rondine show car. A one-of-a-kind “Corvette in an Italian suit”. As a young boy, I had a die-cast model of it.

    1. It’s an interesting look. I think the tail is more successful than the front end, where the half-concealed headlights make it look a trifle boss-eyed from some angles.

Leave a Reply

Your email address will not be published. Required fields are marked *

Comments may be moderated. Submitting a comment signifies your acceptance of our Comment Policy — please read it first! You must be at least 18 to comment. PLEASE DON'T SUBMIT COPYRIGHTED CONTENT YOU AREN'T AUTHORIZED TO USE!